Team Associated RC8 B3.2 Team 1/8 4WD Off-Road Nitro Buggy Kit # 80939

The Team Associated RC8 B3.2 Team 1/8 4WD Off-Road Nitro Buggy Kit was developed with a focus on key components that improved durability, accelerated maintenance, and expanded upon its race-winning heritage within the RC8B3 platform. Redesigned suspension arms feature bottom-loaded inserts to adjust flex characteristics. The rear suspension arm length has been increased while reducing the arm mount width to improve performance in all conditions. A 4-piece center bulkhead allows for easier access to the center differential, making adjustments even faster. The radio tray design features an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RCB3.2 to be run with the included stiff bladders, optional standard bladders (not included), or as emulsion with no bladders – all with the same cap. The RC8B3 platform was born with Team Associated “Champion by Design” heritage and the RC8B3.2 plans to continue dominating the 1:8 scale off road racing scene! NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a full list of items required to complete the model. Features: Suspension arm design with inserts for flex adjustments Longer rear suspension arm length with narrow rear arm mounts Center bulkhead splits and has front/rear specific top halves to prevent brake misalignment Enclosed battery box for quick and easy battery removal Larger receiver box for better wire management One-piece graphite transponder and electronic switch mount Flex Control radio tray has three different configurations for chassis flex adjustment Stiff shock bladder design improves jumping and handling performance Updated shock cap works for bladder or emulsion style shock setups Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws I.F.M.A.R. approved rear wing 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios Updated chassis with chamfered front edges to reduce drag Side guards are now threaded into the chassis from the top side of the car 90% parts compatibility with RC8B3.2e Specifications: Power Source: Nitro Fuel Terrain: Off-Road Body Style: Buggy Scale Size: 1:8 Scale Assembly Level: Kit* Length: 486mm (19.13in) Width: 304.5mm (11.99in) Wheelbase: varies Weight: varies Drive: 4WD Needed to Complete: .21 class rear exhaust engine Exhaust system: muffler and header joining pack, or muffler spring 2 or 3 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended 4.8-7.4v receiver battery Flat style NiMH, OR Flat style LiPo receiver battery Model car fuel (20-30% nitro recommended) Fuel bottle Glow igniter Starter box 1:8 scale buggy tires & wheels CA (cyanoacrylate) glue Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush Thread-locking compound Steering servo Throttle servo Silicone Shock & Diff Fluid Tools